Datalogic-scanning Pegaso Manual do Utilizador descarregar pdf (Página 56)

3-10

Pegaso™ Industrial PDA with Windows

Updating the Pegaso Firmware

After copying the firmware image to the host PC ("Retrieving a Firmware Image

Update" on page 3-8) and installing FUU ("Installing FUU on the Host PC" on page 3-

8), you can upgrade the firmware on your Pegaso.

1. Go to Start > Programs > Firmware Update Utility > Firmware Update Utility.

2. Verify that ActiveSync is selected from the Communicate Using pull-down list.

3. Click browse (...) and navigate to the location where you saved the firmware file for

your terminal.

4. Select the current *.img file and click Open.

5. Verify that the Pegaso is turned on. Insert the device into a powered dock con-

nected to the host computer.

6. Click

Update Terminal on FUU on the host PC.

The following steps require that you have already established an ActiveSync connection

between the host computer and the Pegaso. To establish an ActiveSync connection with

the Pegaso, refer to "Installing & Setting Up Microsoft ActiveSync" on page 4-1 and

"Using ActiveSync" on page 4-5, for more information on ActiveSync.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 171 172

Sem comentários

Datalogic-scanning Pegaso Manual do Utilizador Página 56