Datalogic-scanning DS8100A Manual do Utilizador descarregar pdf (Página 5)

DS8100A QUICK GUIDE

By configuring the oscillating speed up to the maximum value of 19 Hz, raster emulation can be performed for

reading fast moving objects.

Hz Max. Aperture

0-5 50°

6-10 30°

11-15 20°

16-19 10°

NOTE

By limiting the raster width to the minimum necessary, the number of scans on the reading

surface is increased.

Electrical Connections:

The details of the connector pins are indicated in the following tables:

The DS8100A scanner provides a 26-pin male D-sub connector for connection to power supply, Host interface

(Main and Aux), and input/output signals.

26-pin D-Sub Connector Pinout

Pin Name Function

Chassis - internally connected to GND

1 CHASSIS

Cable shield connected to chassis

20 RXAUX Receive data of auxiliary RS232 (referred to GND)

21 TXAUX Transmit data of auxiliary RS232 (referred to GND)

8 OUT 1+ Configurable digital output 1 – positive pin

22 OUT 1- Configurable digital output 1 – negative pin

11 OUT 2+ Configurable digital output 2 – positive pin

12 OUT 2- Configurable digital output 2 – negative pin

16 OUT 3A Configurable digital output 3 – polarity insensitive

17 OUT 3B Configurable digital output 3 – polarity insensitive

18 EXT_TRIG/PS A External trigger (polarity insensitive) for PS

19 EXT_TRIG/PS B External trigger (polarity insensitive) for PS

6 IN2/ENC A Input signal 2 (polarity insensitive) for Encoder

10 IN2/ENC B Input signal 2 (polarity insensitive) for Encoder

14 IN3A Input signal 3 (polarity insensitive)

15 IN4A Input signal 4 (polarity insensitive)

24 IN_REF Common reference of IN3 and IN4 (polarity insensitive)

9, 13 VS Supply voltage – positive pin

23, 25, 26 GND Supply voltage – negative pin

26-pin male D-sub Connector

Main Interface Connector Pinout

Pin RS232 RS485 Full-Duplex RS485 Half-Duplex

20 mA C.L.

(INT-30 with C-BOX 100 only)

2 TX TX485+ RTX485+

3 RX RX485+

4 RTS TX485- RTX485-

5 CTS RX485-

7 GND_ISO GND_ISO GND_ISO

see INT-30 instructions

1 2 3 4 5 6 7 8 9 10 ... 22 23

Comentários a estes Manuais

Sem comentários

Datalogic-scanning DS8100A Manual do Utilizador Página 5

Comentários a estes Manuais

Manuais e produtos relacionados com Scanners Datalogic-scanning DS8100A