Datalogic-scanning 4410 Manual do Utilizador descarregar pdf (Página 19)

Setting Up the Mobile Computer

Quick Reference Guide 17

For detailed instructions, reference the PRG.

Connecting to a PC

In order for the Falcon to communicate with a host PC, Microsoft® ActiveSync must

be installed on the computer. Go to www.microsoft.com/downloads/ for information.

Reference the PRG for detailed instructions.

Installing the USB Driver

So the Host PC can communicate with the Falcon, install the USB driver file

from the CD that came with the Falcon, or download it from the Datalogic

website. Follow the directions on the CD, or use the following instructions:

1. Microsoft

ActiveSync must be installed on your computer before pro-

ceeding. Go to www.microsoft.com for information.

2. Copy the current USB driver file from the Falcon CD to the

C:\Pro-

gram Files\Microsoft ActiveSync\Drivers

3. Connect the USB cable to the Falcon or place the Falcon in the dock.

4. Connect the USB cable to the Host PC.

5. Follow directions on screen. The specified source directory is the one

identified in step 2.

Serial Cable Setup

1. To connect the Falcon using a Serial cable, go to Start > Settings > Control

Panel > PC Connection

2. If not already checked, select

Enable direct connections to the desktop com-

puter.

3. Tap Change Connection and select Serial from the dropdown box.

4. Tap

OK.

IP Network Setup

1. Select Start > Settings > Network and Dialup Connections.

2. Double-tap on the item (varies based on the radio installed and the number of

connections).

3. Complete the two tabs (shown in Figure

8):

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 75 76

Sem comentários

Datalogic-scanning 4410 Manual do Utilizador Página 19