Datalogic-scanning CBX500 Manual do Utilizador descarregar pdf (Página 9)

CBX500 INSTALLATION MANUAL

PINOUT

Pinouts

Group Name Function

Vdc Power Supply Input Voltage +

GND Power Supply Input Voltage -

Input Power

Earth Protection Earth Ground

+V Power Source – External Trigger

I1A External Trigger A (polarity insensitive)

I1B External Trigger B (polarity insensitive)

External Trigger

Input

-V Power Reference – External Trigger

+V Power Source – Inputs

I2A Input 2A (polarity insensitive)

I2B Input 2B (polarity insensitive)

Generic Input

-V Power Reference – Inputs

+V Power Source – Outputs

-V Power Reference – Outputs

O1+ Output 1+

O1- Output 1-

O2+ Output 2+

Outputs

O2- Output 2-

O3A Output 3A (polarity insensitive)

O3B Output 3B (polarity insensitive)

+V Power Source – Other I/O

I3A Input 3A (polarity insensitive)

I4A Input 4A (polarity insensitive)

-V Power Reference – Other I/O

I34B Input 3B and 4B (common) (polarity insensitive)

Other I/O

I34B Input 3B and 4B (common) (polarity insensitive)

TX Auxiliary Interface TX

RX Auxiliary Interface RX

Auxiliary

Interface

SGND Auxiliary Interface Reference

REF Network Reference

ID+ ID-NET™ network +

ID-NET™

ID- ID-NET™ network -

Network Shield Network Cable Shield

RS232 RS485FD RS485HD

TX TX+ RTX+

RTS TX- RTX-

RX *RX+

CTS *RX-

Main Interface

SGND SGND SGND

The input power signals Vdc, GND and Earth as well as the network signals REF, ID+, ID- and Shield; and

RTX+, RTX- and SGND are repeated to facilitate system cabling. In this way the power and network busses can

enter and exit the CBX500 from different spring clamps but be physically connected together.

* Do not leave floating, see Reading Device Reference Manual for connection details.

NOTE

To avoid electromagnetic interference:

- Connect CBX500 Protection Earth (Earth) to a good earth ground.

- Connect the reading device chassis to earth ground through the jumper, (default setting, see

Figure 8).

- Connect the Network Cable Shield (Shield) to Filtered Earth through the jumper (default

setting, see Figure 7).

CAUTION

Do not connect to the Main Interface spring clamp terminals if using Host Interface Modules

(Fieldbus).

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Comentários a estes Manuais

Sem comentários

Datalogic-scanning CBX500 Manual do Utilizador Página 9

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Datalogic-scanning CBX500